Troubleshooting
37
Disc
Qi
Problem
Cause
Solution
Playback does not start after a disc is inserted.
Some functions are not available.
The unit does not support the disc inserted.
Use a disc that is supported by the unit (
Playback does not start (or stops immediately)
when
a
/
d
is pressed.
The disc may be dirty.
Wipe the disc clean (
The unit does not support the disc inserted.
Use a disc that is supported by the unit (
If the unit was moved from a cold to warm place, condensation
may have formed on the disc reading lens.
Wait for an hour or two until the unit adjusts to the room
temperature, and try again.
The CD is not ejected when
=
is pressed.
Use Disc Manual Eject in the option settings to eject the disc
(
Problem
Cause
Solution
The unit stops charging.
Objects are positioned near the Qi icon.
Remove the objects.
The unit will temporarily stop charging when it or the mobile
device becomes too hot.
Charging will resume once the temperature of the unit or mobile
device has dropped to an acceptable temperature.