Yamaha TSX-B235D Owner'S Manual Download Page 12

Page: 12 / 32

This unit provides

Bluetooth

functionality. You can enjoy wireless music playback from your

Bluetooth

component (mobile

phone, digital audio player, etc.). Please also refer to the owner’s manual of your

Bluetooth

component.

You’ll need to perform the pairing operation the first time you use your

Bluetooth

component with this unit, or if the pairing

settings have been deleted. Pairing is an operation that registers the communicating component (subsequently called “the
other component”) with this unit. Once pairing has been completed, subsequent reconnection will be easy even after the

Bluetooth

connection is disconnected (

☞

P. 11). If pairing is not successful, refer to the item

“Bluetooth”

“TROUBLESHOOTING” (

☞

P. 23).

Yamaha does not guarantee all connections between this unit and

Bluetooth

component.

• This unit can be paired with up to 8 other components. When pairing with the ninth component has succeeded, pairing data for the

component with the oldest connection date will be deleted.

• If this unit is connected via

Bluetooth

to another component, hold down

source button on this unit or

on the remote control

to disconnect the

Bluetooth

connection before you perform the pairing operation.

LISTENING TO MUSIC FROM YOUR

Bluetooth

COMPONENT

Playing back from your

Bluetooth

component

Press the

source button to switch the

audio source to

Bluetooth

Perform

Bluetooth

pairing on the other

component.

For details refer to the owner’s manual of the other
component.

From the

Bluetooth

connection list of the other

component, choose this unit (TSX-B235D
Yamaha).

When pairing has been completed, the front panel display
of this unit will indicate “BT Pairing OK”.

If you are asked to enter a password, enter the numerals “0000”.

Connect this unit and your other component
via

Bluetooth

Play back music from your

Bluetooth

component.

Take care that the volume setting of this unit is not too high. We
recommend that you adjust the volume on the other component.

• If you connect via

Bluetooth

from your other component and

playback music while this unit is in standby (except ECO
standby), this unit will automatically turn on.

• If you disconnect the

Bluetooth

connection from your other

component while the audio source is set to

Bluetooth

, this unit

will automatically turn off.

• If

Bluetooth

is selected as the audio source, this unit will

automatically turn off when 20 minutes have elapsed without any

Bluetooth

connection nor any operation performed.

AUX

USB

RADIO

1 5 : 3 0

B T

P a i r i n g O K

TSX-B235_AB_En.book Page 10 Wednesday, May 13, 2015 5:27 PM

Summary of Contents for TSX-B235D

































Search results

Summary of Contents for TSX-B235D

Reviews:

Related manuals for TSX-B235D

Brands by name

Popular brands

Yamaha TSX-B235D, Owner'S Manual

Search results

Summary of Contents for TSX-B235D

Reviews:

Related manuals for TSX-B235D

Brands by name

Popular brands