10
En
■
PLAYER SECTION
iPod
• Supported iPod .... iPod (5th generation), iPod classic, iPod
nano, iPod touch, iPhone, iPhone 3G, iPhone 3GS
AUX IN
• Input connector
............STEREO L/R: 3.5 mm (1/8 in) STEREO mini Jack
■
AMPLIFIER SECTION
• Maximum output power .......................... 4 W + 4 W + 8 W
(6
Ω
1 kHz, 10% THD)
• Driver unit .................. 4 cm (1 5/8 in) full-range driver × 2
5.5 cm (2 1/8 in) SR-Bass × 1
■
TUNER SECTION
• Tuning range
FM .................................................. 87.50 to 108.00 MHz
■
GENERAL
• Power Supply........................... AC 100 to 240 V, 50/60 Hz
• Power consumption ..................................................... 10 W
• System off consumption ............................................. 1.2 W
• Standby consumption ......................................1.0 W or less
• Dimensions (W × H × D) ................... 210 × 110 × 134 mm
(8 1/4 × 4 1/4 × 5 1/4 in)
• Weight ........................................................ 1.4 kg (3.1 lbs.)
Specifications are subject to change without notice.
iPod™, iPhone™
iPod is a trademark of Apple Inc., registered in the U.S. and
other countries.
iPhone is a trademark of Apple Inc.
“Made for iPod” means that an electronic accessory has been
designed to connect specifically to iPod and has been
certified by the developer to meet Apple performance
standards.
“Works with iPhone” means that an electronic accessory has
been designed to connect specifically to iPhone and has been
certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
■
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
■
Special Instructions for U.K.
Model
SPECIFICATIONS
Note
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED
IN ACCORDANCE WITH THE FOLLOWING
CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured BLUE must be connected
to the terminal which is marked with the letter N or
coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured RED.
Make sure that neither core is connected to the earth
terminal of the three pin plug.
