TA3 SH3 SC3 Owner’s Manual
18
Playing with digital sounds using the headphones (Quiet mode)
This lets you play with the acoustic piano sound muted and listen to the digital sound through the headphones. In this
condition, no piano sound can be heard from the instrument. The movement of the keys is detected by the sensors and
transmitted to the tone generator, and then the sound is output from the headphones.
NOTE
The physical sound of the keyboard mechanism remains even when playing in the Quiet mode.
1
Rotate the [VOLUME] control to the far-left position to set
the volume to minimum.
2
Press the [
P
] (Standby/On) switch to turn the power on.
3
Stop the acoustic piano sound (or activate the Quiet mode) by one of the following
operations.
For pianos with a silencing lever:
Pull the silencing lever towards you until you hear a click and feel the
mechanism catch.
For upright pianos without a silencing lever:
Press the silencing pedal (center pedal) and slide it to the left until it is
locked in that position.
For grand pianos without a silencing lever:
Make sure that the [Aco.] lamp is turned off. If the lamp is
lit, press the [VOLUME] control to turn it off.
4
Plug the headphones into the [PHONES] jack.
You can connect a pair of headphones to each of the two jacks. If you
are using only one pair, insert the plug into either of these jacks.
CAUTION
Do not use the headphones for a long period of time at a high or
uncomfortable volume level, since this can cause permanent hearing
loss.
NOTICE
Do not pull the cord of the headphones or apply excessive force on the
plug. This can damage the headphones or the control unit and result in
sound degradation.
TA3
SH3
SC3
Off
Phone plug
(stereo mini)
Summary of Contents for TransAcoustic TA3
Page 4: ...TA3 SH3 SC3 Owner s Manual 4...
Page 85: ......
