Instrument an
d
control functions
3-31
3
EAU63062
Helmet hol
d
er
The helmet holder is located under the
passenger seat. A helmet holding ca-
ble is provided in the tool kit to secure
a helmet to the helmet holder.
To secure a helmet
1. Remove the passenger seat.
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loops over the helmet hold-
er.
3. Place the helmet on the right side
of the vehicle, and then install the
seat.
WARNING! Never ri
d
e with
a helmet attache
d
to the helmet
hol
d
er, since the helmet may hit
o
b
jects, causin
g
loss of control
an
d
possi
b
ly an acci
d
ent.
[EWA10162]
To release the helmet
Remove the passenger seat, remove
the helmet holding cable from the hel-
met holder and the helmet, and then in-
stall the seat.
EAU62550
Stora
g
e compartment
The storage compartment is located
under the passenger seat. (See page
3-27.)
When storing documents or other
items in the storage compartment, be
sure to wrap them in a plastic bag so
that they will not get wet. When wash-
ing the vehicle, be careful not to let any
water enter the storage compartment.
WARNING
EWA15401
Do not excee
d
the maximum loa
d
of
180 k
g
(397 l
b
) for the vehicle.
1. Helmet
2. Helmet holding cable
3. Helmet holder
3
2
1
1. Storage compartment
1
UB5CE1E0.book Page 31 Monday, August 6, 2018 1:13 PM
