Instrument an
d
control functions
5-36
5
With the engine turned off:
1.Place vehicle on centerstand.
2.Move the sidestand down.
3.Set engine stop switch to run position.
4.Turn main switch to on position.
5.Shift transmission into neutral.
6.Push the start switch.
Does the engine start?
With the engine still running:
7. Move the sidestand up.
8. Pull the clutch lever.
9. Shift transmission into gear.
10. Move the sidestand down.
Does the engine stall?
After the engine has stalled:
11. Move the sidestand up.
12. Pull the clutch lever.
13. Push the start switch.
Does the engine start?
The system is OK.
The motorcycle can be ridden.
YES
NO
YES
NO
YES
NO
The neutral switch may not be working.
The motorcycle should not be ridden
until
checked by a Yamaha dealer.
The clutch switch may not be working.
The motorcycle should not be ridden
until
checked by a Yamaha dealer.
The sidestand switch may not be working.
The motorcycle should not be ridden
until
checked by a Yamaha dealer.
WARNING
The vehicle must be placed on the
centerstand during this inspection.
If a malfunction is found, have the vehicle
inspected before riding.
UBAPE1E0.book Page 36 Thursday, January 6, 2022 2:19 PM
