Instrument an
d
control functions
5-15
5
“Maintenance”
This module allows you to record dis-
tance traveled between engine oil
changes “Oil”, and two other mainte-
nance intervals of your choice “Interval
1”/ “Interval 2”. Short press the wheel
switch “
” inward to enter the items
sub-module, where the current mile-
age for the item can be viewed and the
item can be reset.
After maintenance to one of the items
has been completed, short press the
wheel switch “
” to select it and
then long press the wheel
switch “
” to reset it.
“Unit”
This module allows you to change the
measurement units. Each of the three
items contain a sub-menu where the
desired unit is selected.
TIP
If “mile” is selected as a speed unit,
“MPG” will be automatically set as the
fuel economy unit and the menu item
will be grayed out.
“Bri
g
htness”
This module allows you to adjust the
screen brightness between 3 different
levels.
TIP
The TFT display is equipped with an
ambient light sensor which is used to
adjust the screen brightness automati-
cally. Using this module to manually
set the brightness cancels automatic
mode. Turning the main switch
“OFF”/“ON” will reset screen bright-
ness to automatic mode.
UB4T20E0.book Page 15 Tuesday, April 4, 2023 9:44 AM
