manualshive.com logo in svg

Yamaha Tmax XP500 2016, Owner'S Manual

Share
Download
Yamaha Tmax XP500 2016 Owner'S Manual Download Page 60

Periodic maintenance and adjustment

7-3

1

2

3

4

5

6

7

8

9

10

11

12

13

14

EAU46862

TIP

The annual checks must be performed every year, except if a kilometer-
based maintenance, or for the UK, a mileage-based maintenance, is per-
formed instead.

From 50000 km (30000 mi), repeat the maintenance intervals starting from
10000 km (6000 mi).

Items marked with an asterisk should be performed by a Yamaha dealer as
they require special tools, data and technical skills.

EAU63321

Periodic maintenance chart for the emission control system

NO.

ITEM

1

*

Fuel line

• Check fuel hoses for cracks or 

damage.

2

*

Spark plugs

• Check condition.
• Clean and regap.

• Replace.

3

*

Valves

• Check valve clearance.
• Adjust.

Every 40000 km (24000 mi)

4

*

Fuel injection

• Adjust engine idling speed and 

synchronization.

X 1000 km

CHECK OR 

MAINTENANCE JOB

X 1000 mi

ODOMETER 

READINGS

ANNU

AL CHECK

1

10

20

30

40

0.6

6

12

18

24

2PW-9-E1.book  3 ページ  ２０１５年９月１０日　木曜日　午後５時１７分

Summary of Contents for Tmax XP500 2016















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands