TF Series & Tio1608-D
7
www.yamahaproaudio.com
The I/O patches for each TF Series are shown below.
With two Tio1608-D racks
Two Tio1608-D racks can be connected together to build a stagebox
system with 32 INs/16 OUTs. For this system example, we recommend
that you set the IDs for the two Tio1608-D racks to 1 and 2. Set the IDs
of each Tio1608-D to 1 and 2 respectively, and switch the input sources
for CH 1-32 on the TF Series to SLOT. This will allow the input from the
INPUT connectors of each Tio1608-D to be assigned to INPUT CH 1–16
and 17–32 respectively.
The I/O patches for each TF Series are shown below. When you want to
utilize all of the input channels on the TF3/TF5, use the input connectors
on the rear panel of the TF series.
Channel
I/O connector
TF5
TF3
TF1
INPUT
CH 1-16
Tio1608-D (ID: 1) INPUT 1-16
CH 17-32
Tio1608-D (ID: 2) INPUT 1-16
CH 33-40
TF INPUT
1-8
TF INPUT
9-16
-
OUTPUT
AUX 1-6
Tio1608-D (ID: 1) OUTPUT 1-6
AUX 7-12
Tio1608-D (ID: 2) OUTPUT 1-6
AUX 13-20
-
MATRIX 1-4
-
STEREO L/R
Tio1608-D (ID: 1) OUTPUT 7-8
Tio1608-D (ID: 2) OUTPUT 7-8
With one Tio1608-D rack
One Tio1608-D rack can be connected to build a stagebox system with 16
INs/8 OUTs. For example, if you use a TF1 and a single Tio1608-D, you
can input the stage mic inputs (16 channels) from the Tio1608-D, and
directly input the remaining 16 channels into the TF1. This will allow you
to utilize the maximum of 32 input channels on the TF1. For this system
example, we recommend that you set the ID for the Tio1608-D to 1. Set
the ID of the Tio1608-D to 1, and switch the input sources for CH 1-16 on
Channel
I/O connector
TF5
TF3
TF1
INPUT
CH 1-16
Tio1608-D (ID: 1) INPUT 1-16
CH 17-32
Tio1608-D (ID: 2) INPUT 1-16
CH 33-40
Tio1608-D (ID: 3) INPUT 1-8
-
OUTPUT
AUX 1-6
Tio1608-D (ID: 1) OUTPUT 1-6
AUX 7-12
Tio1608-D (ID: 2) OUTPUT 1-6
AUX 13-20
Tio1608-D (ID: 3) OUTPUT 1-8
MATRIX 1-4
-
STEREO L/R
Tio1608-D (ID: 1) OUTPUT 7-8
Tio1608-D (ID: 2) OUTPUT 7-8
