TF Series & Tio1608-D
6
www.yamahaproaudio.com
System Examples
Here we will introduce some representative system examples when
connecting the TF Series Digital Mixer and the Tio1608-D. The system
examples shown in this guide can all be created by using the "Quick
Config" function.
As shown in the diagram below, the I/O patches on the Tio1608-D are
automatically determined by ID when the Quick Config function is used.
TF Series
Tio1608-D (ID:
1
)
INPUT 1-16 → SLOT 1-16
OUTPUT 1-6 ← AUX 1-6
OUTPUT 7-8 ← STEREO L/R
Tio1608-D (ID:
2
)
INPUT 1-16 → SLOT 17-32
OUTPUT 1-6 ← AUX 7-12
OUTPUT 7-8 ← STEREO L/R
Tio1608-D (ID:
3
)
INPUT 1-8 → SLOT 33-40
OUTPUT 1-8 ← AUX 13-20
I/O patches on the Tio1608-D when using Quick Config
With three Tio1608-D racks
Three Tio1608-D racks can be connected to build a stagebox system of up
to 40 INs/24 OUTs. As the TF1 has 32 input channels, the number of
available inputs will be the same, even when two Tio1608-D racks are
used. Only the number of outputs will differ. Set the IDs of each Tio1608-
D to 1, 2 and 3 respectively, and switch the input sources for INPUT CH
1–40 on the TF Series to SLOT. This will allow the input from the INPUT
connectors of each Tio1608-D to be assigned to INPUT CH 1–16, 17–32
and 33–40 respectively.
