Yamaha TF5, Reference Manual

Page: 67 / 91

Configuration screens
Reference Manual
TF Series
- 67 -
GEQ screen
You can use the internal graphic equalizer (GEQ) to process AUX 1–8 and STEREO channel
signals.
The GEQ is a mono, 12-band EQ. Each band is 1/3 octave wide, with an adjustable gain range
of ±15 dB.
31 bands are available; you can adjust gain for up to 12 bands.
1
GEQ button
Turns the GEQ on and off.
2
GEQ channel selection buttons
These buttons are displayed only when configuring the GEQ for stereo AUX buses or the
STEREO channels.
They are not displayed for mono AUX buses.
: Turns the GEQ left/right channel link on and off.
L/R : Allows you select the left and right GEQ channels.
3
Recall Safe button
Displays the RECALL SAFE screen. (

page 23 )
4
Fader Assign button (V2.0 and later)
When this button is turned on, you can use the faders to adjust each band of the GEQ.
5
EQ graph, RTA display, band selection
Displays the EQ settings with RTA (real-time analysis).
Swipe left or right or touch an area to display the gain sliders for other bands.
When the Fader Assign button is turned on, you can use this area to change which
bands can be adjusted by the faders. (TF3 and TF1 only.)
6
Gain slider
Adjusts the gain for the corresponding band.
Swipe left or right to display the gain sliders for other bands.
When the Fader Assign button is turned on, you can use this area to change which
bands can be adjusted by the faders. (TF3 and TF1 only.)
7
Output level meter
Displays the GEQ output level.
8
Available bands display
Displays the number of additional bands that you can adjust.
ձ ղ ճ մ
ն
շ
յ
ո
Using GEQ
1.
Touch the GEQ button to turn GEQ on.
2.
Swipe left or right on the gain sliders to display the
desired bands.
3.
Drag sliders up and down to adjust the gain of the corresponding bands.
You can confirm the overall output using the output level meter.
Once you have adjusted gain for 12 bands, the gain sliders for the remaining bands are displayed in
gray. If you want adjust gain for other bands, you must first set the gain to 0 for one of the bands you
have already adjusted.
Touch the gain slider quickly two times to reset it to its default value (0 dB).
Gain slider Output level meter