- 21 -
TF series
Quick Guide
7. Setup
This section explains how to set up the TF series
console the first time you turn it on.
7-1 Setting the internal clock
Set the console’s internal clock, including the date,
time, and format. The date and time set here is used
as a timestamp when saving Scenes.
1
Touch the SYSTEM SETUP icon
.
The SYSTEM SETUP screen is displayed.
2
Touch the TIME button.
The screen for setting the time is displayed.
3
Slide the desired fields up and down to set the
date and time.
4
When finished, touch [OK].
5
Press the Home key (
).
The OVERVIEW screen is displayed.
NOTE
In addition to the internal clock, you can configure the
following items. For details, refer to the Reference Manual.
•
AUX bus signal type
•
Network settings
•
OMNI OUT settings
•
Recall Safe channels
7-2 Initialization (factory reset)
In the event that an internal memory error occurs or
you have forgotten your password and cannot operate
the console, you can use the following procedure to
initialize the console.
NOTE
All information that you have stored in the unit will be erased
when you initialize the unit.
Use caution when performing this procedure.
1
Turn on the console while holding down the
Home key (
).
2
When the maintenance screen appears, press
the Initialize All Memories button.
All settings will be restored to the factory defaults.
7-3 Attaching the optional Rack Mount
Kit (RK5014) (TF1 only)
The procedure is the same for the left and right sides
of the console. The right side is shown here.
1
Prepare the console by removing the side pads.
1
Remove the two screws that secure each side pad.
2
Slide and remove the side pads as shown.
❷
❶
2
Attach the rack mount brackets.
1
Attach the rack mount brackets to the console using the
8 screws (4 per side) that were included with the Rack
Mount Kit.
2
Make sure each bracket is firmly attached.
❶
