Yamaha TF-Rack Reference Manual Download

Page: 74 / 103

Configuration screens

Reference Manual

TF Series

- 74 -

SEND FROM screen

Allows you to send signals from the each channels.

ON button

Determines whether a signal is sent (on) or not sent (off) from the corresponding each
channel.

Send pan slider

Adjusts the pan of the input channel signal that is sent.
For AUX 1–8, this slider is only displayed if the signal type is set to stereo.
Not displayed for MATRIX 1–4 or FX1L–FX2R.

Send level slider

Determines the amount of signal sent from the corresponding each channel.

Pre button

Allows you to select whether the pre-fader or post-fader signal is sent from the
corresponding input channel.

: Before the fader

Off

: After the fader

Not displayed for MATRIX 1–4.

Adjusting the SEND FROM level

Touch the ON button for the input channels
that you want to send.

Touch the send pan slider, and then use the
[TOUCH AND TURN] knob to adjust the pan
of the input channel signal that is sent.

Drag the send level sliders to adjust the
amount of input channel signal that is sent.

Adjusting the send level from AUX channels, STEREO channels, and SUB

channel to a MATRIX channel (V2.5 and later)

Touch the ON button for the AUX channel, STEREO channel, or SUB channel that
you want to send. (It is turned on by default.)

Drag the send level sliders to adjust the amount of AUX channel, STEREO channel,
and SUB channel signal that is sent.

Send level slider

Send pan slider

ON button

Pre button

ON button

Send level slider

NOTE

• You can send the post-on signal of an AUX channel, STEREO channel, or SUB channel to a MATRIX

channel.

• Left and right channel SEND levels can be adjusted independently for stereo channels such as AUX 9/

10 and STEREO.

Summary of Contents for TF-Rack








































































































Search results

Summary of Contents for TF-Rack

Reviews:

Related manuals for TF-Rack

Brands by name

Popular brands

Yamaha TF-Rack, Reference Manual

Search results

Summary of Contents for TF-Rack

Reviews:

Related manuals for TF-Rack

Brands by name

Popular brands