Yamaha TENORI-ON TNR-O Page 64 Manual Download

Page: 64 / 123

Parameter Settings

TENORI-ON Manual

Setting Parameters with the Jog Dial

■

File Menu

1. Song

Provides access to song file operations.

"Song" files are files created by the TENORI-ON song recording function (

➝

Page 109

In addition to performance data (active notes and settings such as voice, tempo, etc.) for all

layers and blocks, all button and jog dial operations are recorded in real time. A recorded

Song file can then be loaded in into the TENORI-ON and played back, precisely reproducing

the entire performance as it occurred.

The following 3 Song file functions are provided:

●

Load Song

Loads a Song file that has been saved to an SD Memory Card into the TENORI-ON.

Insert the SD Memory Card containing the file you want to load into the TENORI-ON

card slot.

Use the jog dial and [OK] button to navigate to the Song function menu as follows:

"Main menu"

➝

"File menu"

➝

"Song"

Use the jog dial to highlight the "Load" function, then press the [OK] button.

Song files on the card will appear as a list on the LCD display (with no file extension).

Use the jog dial to select the file you want to load.

●

Only files that are in song-file format will be displayed.

Press the [OK] button to load the selected file.

The display shown below will appear while the file is being loaded.

Press the [OK] or [CANCEL] button to cancel the load operation.

Load Song

Page 64

Rename Song

Page 65

Delete Song

Page 67

Song ∞

Operation:

Load

Song: Load ∞

0302E-SONG-01

0302E-SONG-02

0302G-SONG-01

Song: ∞

"0302E-SONG-02 "

CANCEL

The name of the Song file being
loaded.

Summary of Contents for TENORI-ON TNR-O




























































































































Search results

Summary of Contents for TENORI-ON TNR-O

Reviews:

Related manuals for TENORI-ON TNR-O

Brands by name

Popular brands

Yamaha TENORI-ON TNR-O, Manual

Search results

Summary of Contents for TENORI-ON TNR-O

Reviews:

Related manuals for TENORI-ON TNR-O

Brands by name

Popular brands