Instrument an
d
control functions
5-27
5
EAU84680
Lu
gg
a
g
e strap hol
d
ers
Use the indicated strap points to se-
cure luggage ties to the vehicle.
EAUM4130
Front fen
d
er
To suit the riding conditions, the front
fender height can be adjusted.
To a
d
just the front fen
d
er hei
g
ht
1. Loosen the bolts on each side of
the front fender.
2. Move the front fender to the de-
sired height.
3. Tighten the bolts to the specified
torque.
EAUM4520
DC power outlets
This vehicle is equipped with a 5V USB
jack, a grip warmer connector and a
fog lamp DC connector.
NOTICE
ECA26810
Do not use any sin
g
le electrical ac-
cessory or com
b
ination of accesso-
ries that require more than the
state
d
capacity at any one time. This
may overloa
d
the circuit an
d
cause
the fuse to
b
low.
TIP
To prevent battery drain, do not use
accessories with the engine off.
1. Luggage strap holder
1
1
1. Bolt
Ti
g
htenin
g
torque:
Front fender bolt:
8 N·m (0.8 kgf·m, 5.9 lb·ft)
1
DC power outlet circuit capacities:
USB jack maximum capacity:
5 V (2 A)
Grip warmer and Fog lamp circuit:
120 W (10 A)
UBVWE0E0.book Page 27 Friday, July 14, 2023 3:12 PM
