Instrument an
d
control functions
4-21
4
3. Install the bleed screws.
4. Lower the front wheel so that it is
on the ground, and then put the
sidestand down.
EAUM4121
A
d
justin
g
the shock a
b
sor
b
er
assem
b
ly
This shock absorber assembly is
equipped with a spring preload adjust-
er and rebound and compression
damping force adjusters.
NOTICE
ECA10102
To avoi
d
d
ama
g
in
g
the mechanism,
d
o not attempt to turn
b
eyon
d
the
maximum or minimum settin
g
s.
Sprin
g
preloa
d
Turn the adjuster in direction (a) to in-
crease the spring preload.
Turn the adjuster in direction (b) to de-
crease the spring preload.
To set the spring preload, turn the ad-
juster in direction (b) until it stops, and
then count the clicks in direction (a).
TIP
When turning the spring preload
adjuster in direction (b), the 0 click
position and the 1 click position
may be the same.
When turning the spring preload
adjuster in direction (a), it may
click beyond the stated specifica-
1. Bleed screw
1
1. Spring preload adjusting knob
Sprin
g
preloa
d
settin
g
:
Unit for adjustment:
Click
Minimum (soft):
0
Standard:
10
Maximum (hard):
24
1
(b)
(a)
UBHL10E0.book Page 21 Tuesday, October 5, 2021 9:57 AM
