Yamaha Tenere 700 2020, Service Manual

Page: 307 / 472

THROTTLE BODIES
7-14
EAS30980
INSTALLING THE THROTTLE BODIES
1. Install:
• Throttle bodies
a. Fit the throttle bodies to the throttle body
joints.
b. Fit the air filter case joints to the throttle
bodies.
c. Place the wire harness “1” in its original
position, and then insert the projections on
the holders “2” into the holes in the frame
and battery box.
d. Tighten the air filter case bolts (left/right).
e. Install the battery box bracket “1”, and
then tighten the battery box bracket bolts
“2” and battery box bolts “3”.
a. #1 Cylinder
b. #2 Cylinder
A. Left
B. Right
T
R
.
.
Air filter case bolt (left)
10 N·m (1.0 kgf·m, 7.4 lb·ft)
Air filter case bolt (right)
10 N·m (1.0 kgf·m, 7.4 lb·ft)
T
R
.
.
Battery box bracket bolt
9 N·m (0.9 kgf·m, 6.6 lb·ft)
Battery box bolt
9 N·m (0.9 kgf·m, 6.6 lb·ft)
LOCTITE®
a
b
45°
45°
A B
2
1
1
2
2
3
3