Yamaha T155 2021 Owner'S Manual Download

Page: 32 / 92

Instrument an

control functions

4-13

To close the seat

1. Fold the seat down, and then push

it down to lock it in place.

2. Remove the key from the main

switch if the vehicle will be left un-
attended.

TIP

Make sure that the seat is properly se-
cured before riding.

EAUV0850

Helmet hol

ers

The helmet holders are located under
the seat.

To secure a helmet to a helmet hol

1. Open the seat. (See page 4-12.)
2. Attach the D-ring of the helmet

strap to a helmet holder, and then
securely close the seat.

WARNING! Never ri

e with a

helmet attache

to the helmet

hol

er, since the helmet may hit

jects, causin

loss of control

possi

ly an acci

ent.

[EWA10162]

To release a helmet from a helmet
hol

Open the seat, remove the helmet from
the helmet holder, and then close the
seat.

1. Helmet holder
2. D-ring

UBAWE0E0.book Page 13 Wednesday, March 3, 2021 2:21 PM

Summary of Contents for T155 2021





























































































Search results

Summary of Contents for T155 2021

Reviews:

Related manuals for T155 2021

Brands by name

Popular brands

Yamaha T155 2021, Owner'S Manual

Search results

Summary of Contents for T155 2021

Reviews:

Related manuals for T155 2021

Brands by name

Popular brands