Yamaha SY-77, Operating Manual

Page: 241 / 268

UTILITY MODE
DISK UTILITY
2. Load from disk
JUMP #817
Summary: Synthesizer and sequencer data can be
loaded from disk.
Procedure:
From: disk utility job directory (JUMP #816)
Select: 02:Load From Disk (JUMP #817)
Specify: the type of data to be loaded.
Press: ENTER
Select: the file from which to load the data.
To execute: the loading operation press F8 (Go).
To quit: without loading press EXIT.
Move the cursor in this area to select the type of
data you wish to load from disk.
01: All Data: All data of the SY77
02: Synth All: 64 voices, 64 multis, 32 pan, 2
micro tuning, and system setup
03: Seq All: K-Seq data and setup data of the
sequencer section
04: Syn Setup: Synthesizer system setup data
from a disk file that was saved as "All
Data"
05: Vc & Mlt: 64 voices, 64 multis, 32 pan, and
2 micro tuning data from a disk file that was
saved as "All Data"
06: Pan: 32 pan data from a disk file that was
saved as "All Data"
07: McrTuning: 2 micro tuning data from a disk
file that was saved as "All Data"
08: Seq Setup: Setup data of the sequencer
section
09: Song & Ptn: Song and pattern data of the
sequencer section
10: 1 Voice: A single selected voice from a disk
file that was saved as "All Data"
11: 1 Multi: A single selected multi from a disk
file that was saved as "All Data"
12: Other Seq: Sequencer data in K-Seq, E-Seq,
or N-Seq format
The data that can be loaded will depend on the type
of data that was saved in 1. Save to disk.
Data that was saved
by 1 . Save to disk...
1.All Data
2.Synthesizer All
3.Sequencer All
4.KSEQ, 5. ESQ, 6. NSEQ
... can be loaded
by 2. Load from disk
Any type of data 1,4-11
2.Synth All
3.Seq All
12.Other Sequence
Individual types of data 4-11 can be loaded only
from a file saved as "All Data".
After selecting the desired type of data, press
ENTER to select the disk file from which to load the
data.
see the rest of the filenames press Fl
Load from disk (types 1-9): After selecting a file
press F8 (Go). The display will ask "Are you
sure ?" If you are sure that you want to load the
data then press YES and the data will be loaded
from disk file into the SY77.
Load from disk (types 10, 11): Selecting data
types 10. 1 Voice or 11. 1 Multi allows you to
load a single specified voice (or multi) from a
disk file that was saved as "All Data". The pro-
cedure is exactly the same for voices and multis.
1. After selecting a file press F8 (Dir) to view a list
of the voices (multis) in the selected file.
2. The display will show ten voices (multis) at
and F4 to scroll the dis- once. Use F3
play up or down, and move the cursor to select
the desired voice (multi).
to scroll the filename display up or down.
orF2
The names of all disk files of the selected type
will be displayed. Files that contain no data are
displayed as "----". Move the cursor in this area
to select a file 1-99. You may also use the
numeric keys to directly specify a file number.
The LCD can show only ten filenames at once. To
229