Yamaha SY.22 Authorized Product Manual Download Page 17 | Manualshive

Page: 17 / 101

background image

INTERNAL

CARD

Selecting the VOICE

PLAY Mode, a Voice

Memory, and Voice

The INTERNAL voice memory is a RAM (Random Access Memory) area into

which you can store up to 64 voices that you create or load from an external

memory card. The INTERNAL voice memory is represented on the display by
the letter "I".

The CARD memory bank is a Yamaha MCD64 or MCD32 Memory Card (or
pre-programmed voice card) plugged into the SY22 CARD slot on the rear panel.

Memory cards are convenient for external storage and transportation of voices
that you or others create. You can also store sets of related voices on different
memory cards. An MCD32 Memory Card allows storage of up to 64 voices. An
MCD64 Memory Card holds two banks of 64 voices each — a total of 128 voices
per card (REFERENCE SECTION, page 70). The CARD voice memory is
represented on the display by the letter "C".

Note: No warning is given on the SY22 displays when a memory card backup

battery is about to fail. See your memory card owner's manual for details.

Any voice in any of these voice memories can be selected and played while

the SY22 is in the VOICE PLAY mode.

1. If the VOICE PLAY mode is not already selected — as indicated by a lit

[VOICE] key LED and "VOICE PLAY" across the top of the LCD —

press the [VOICE] key to select it.

2. The [INTERNAL], [CARD], and [PRESET] keys are used to select the

desired voice memory. If no memory card is inserted in the CARD slot, the
"Card not ready!" display will appear if you attempt to select the card voice
memory.

3. The 64 voices in each voice memory are organized into 8 banks of 8 voices

each ( 8 x 8 = 64). Any voice can be selected by specifying its bank using the
BANK keys, and its number using the NUMBER/MULTI PART SELECT
keys.
Voice numbers are displayed on the LCD in the same way. " ," for example,

is not preset voice number 25, but rather preset voice bank 2, number 5. On

the large LED display, this would be shown as "2.5". The 64th preset voice,
therefore, is displayed as "P88" on the LCD or "8.8" on the LED display.
To select voice bank 4 number 7, for example, press the BANK [4] key and

NUMBER/MULTI PART SELECT [7] key — in any order.

12

«
...
15
16
17
18
19
...
»

Summary of Contents for SY.22






































































































Reviews:

No comments

Related manuals for SY.22

Brand: DynaSample Pages: 6

LushOne Synth 101

Brand: Lush Projects Pages: 13

LAPIS ML22594 MB Series

Brand: Rohm Pages: 73

Brand: CORNFIELD ELECTRONICS Pages: 118

Brand: Oberheim Pages: 34

Brand: UltraView Pages: 27

Brand: Kawai Pages: 18

Brand: EarthQuake Pages: 12

Brand: Mutec Pages: 42

Brand: Arturia Pages: 112

Brand: Arturia Pages: 69

Brand: Arturia Pages: 112

minibrute 2 series

Brand: Arturia Pages: 131

Brand: Arturia Pages: 136

Brand: Arturia Pages: 171

Brand: Moog Pages: 82

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands