22
Lubrication
Chain Case
Checking Lubricant Level
(Models with a sight glass)
NOTE: The snowmobile must be
on a level surface for this procedure.
1. Check the lubricant level in the
chain case by using the sight glass at
the right-side footrest.
0753-179
0746-115
NOTE: The correct level is when
the lubricant is at least halfway up in
the sight glass.
NOTE: Adding lubricant can be
done by the snowmobile owner if
qualified to do so. If the owner does
not feel qualified, take the snowmo-
bile to an authorized Yamaha Snow-
mobile dealer for this service. This
service is at the discretion and
expense of the snowmobile owner
.
2. If the lubricant level is low, remove
the fill plug from the chain case
cover and add Yamaha Synthetic
Chain Case Lube through the fill
plug hole. When the lube is halfway
up the sight glass, install the plug.
Checking Lubricant Level
(Models with a level plug)
NOTE: The snowmobile must be
on a level surface for this procedure.
1. Remove the level plug from the
chain case cover. The lubricant
should be level with the bottom
threads of the level plug hole. If the
lubricant level is correct, install the
level plug. Tighten to 0.7 kg-m (60
in.-lb).
0753-159
0753-158
NOTE: Adding lubricant can be
done by the snowmobile owner if
qualified to do so. If the owner does
not feel qualified, take the snowmo-
bile to an authorized Yamaha Snow-
mobile dealer for this service. This
service is at the discretion and
expense of the snowmobile owner
.
2. If the lubricant level is low, remove
the fill plug and add Yamaha Syn-
thetic Chain Case Lube through the
fill plug hole. When the lubricant
reaches the bottom threads of the
level plug hole, install the level plug.
Tighten to 0.7 kg-m (60 in.-lb).
Summary of Contents for SXV4NP
Page 53: ...51 Snowmobile Safety Rules ...
