INSTRUMENT AND CONTROL FUNCTIONS
4-7
4
3. Turn the key to “ON”, and then re-
lease the “SELECT” switch after
five seconds.
4. Adjust the multi-function meter unit
panel brightness level by pushing
the “SELECT” switch.
5. Push the “RESET” switch.
The display will change to the prior
mode.
EAU12349
Handlebar switches
Left
Right
EAU12400
Dimmer switch “
/
”
Set this switch to “
” for the high
beam and to “
” for the low beam.
EAU12430
Turn signal switch “
/
”
To signal a right-hand turn, push this
switch to “
”. To signal a left-hand
turn, push this switch to “
”. When re-
leased, the switch returns to the center
position.
Since this model is equipped with a
self-canceling system, the turn signal
lights will self-cancel after the vehicle
1. Dimmer switch “
/
”
2. Turn signal switch “
/
”
3. Horn switch “
”
3
1
2
1. Engine stop switch “
/
”
2. “SELECT” switch
3. “RESET” switch
4. Start switch “
”
2
1
3
4
U27D11E0.book Page 7 Monday, July 11, 2011 11:15 AM