INSTRUMENT AND CONTROL FUNCTIONS
4-13
4
EAU50680
Seat
To remove the seat
1. Insert the key into the seat lock,
turn it counterclockwise, and then
lift the front of the seat up.
2. Pull the seat forward as shown to
unhook it from the center seat
holder.
3. Pull the seat rearward to unhook it
from the rear seat holder, and then
pull it off.
To install the seat
1. Insert the projection on the rear of
the seat into the rear seat holder.
2. Slide the seat rearward to fit the
slot in its bottom over the center
seat holder.
3. Push the front of the seat down to
lock it in place.
4. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
1. Seat lock
2. Unlock.
2
1
1. Center seat holder
1. Rear seat holder
1
1
1. Projection
2. Rear seat holder
3. Slot
4. Center seat holder
1
2
3
4
U27D10E0.book Page 13 Thursday, July 22, 2010 1:05 PM
