Perio
d
ic maintenance an
d
a
d
justment
7-31
7
b
attery,
b
e sure the key is
turne
d
to “OFF”, then
d
iscon-
nect the ne
g
ative lea
d
b
efore
d
isconnectin
g
the positive lea
d
.
[ECA16303]
2. If the battery will be stored for
more than two months, check the
specific gravity of the electrolyte
at least once a month and fully
charge the battery whenever nec-
essary.
3. Fully charge the battery before
installation.
NOTICE:
When in-
stallin
g
the
b
attery,
b
e sure the
key is turne
d
to “OFF”, then
connect the positive lea
d
b
efore
connectin
g
the ne
g
ative lea
d
.
[ECA16841]
4. After installation, make sure that
the battery leads are properly con-
nected to the battery terminals
and that the breather hose is
properly routed, in good condi-
tion, and not obstructed.
NOTICE:
If the
b
reather hose is posi-
tione
d
in such a way that the
frame is expose
d
to electrolyte
or
g
as expelle
d
from the
b
at-
tery, the frame coul
d
suffer
structural an
d
external
d
ama
g
-
es.
[ECA10602]
EAU53042
Replacin
g
the fuses
The fuse box is located under the rider
seat. (See page 4-9.)
If a fuse is blown, replace it as follows.
1. Turn the key to “OFF” and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
WARNING! Do not
use a fuse of a hi
g
her ampera
g
e
ratin
g
than recommen
d
e
d
to
avoi
d
causin
g
extensive
d
am-
a
g
e to the electrical system an
d
possi
b
ly a fire.
[EWA15132]
1. Spare fuse
2. Signaling system fuse
3. Main fuse
4. Spare main fuse
1
2
3
4
U1BE26E0.book Page 31 Thursday, June 25, 2015 9:38 AM
