INSTRUMENT AND CONTROL FUNCTIONS
4-14
4
EAU34042
Rider seat
To remove the rider seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
2. While holding the key in that posi-
tion, lift the front of the seat up, and
then pull the seat off.
To install the rider seat
1. Insert the projection on the rear of
the seat into the seat holder as
shown.
2. Push the front of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
EAU39155
Passenger backrest
To remove the backrest
1. Open the sidebag lids. (See page
2. Insert the key into the passenger
backrest lock, turn it counterclock-
wise, and then remove the key.
3. Pull the lever on each side of the
backrest upward.
1. Seat lock
2. Unlock.
1. Projection
2. Seat holder
1. Key
2. Unlock.
U2C514E0.book Page 14 Tuesday, September 8, 2009 10:12 AM
