Yamaha Star XV1900AE 2013, Owner'S Manual

Page: 76 / 92

PERIODIC MAINTENANCE AND ADJUSTMENT
7-30
7
EAU38383
Replacin g a turn si g nal li g ht
b ul b
1. Remove the turn signal light lens
by removing the screw, and then
turning the lens counterclockwise.
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by turning it clock-
wise, and then installing the
screw.
NOTICE:
Do not over-
ti g hten the screw, otherwise the
lens may b reak.
[ECA11192]
EAU24331
License plate li g ht
If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
EAU40764
Replacin g an auxiliary li g ht
b ul b
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove the headlight unit. (See
page 7-27.)
2. Remove the auxiliary light bulb
socket (together with the coupler)
by turning the socket counter-
clockwise.
3. Remove the burnt-out bulb by
pulling it out.
1. Turn signal light lens
2. Screw
2
1
1. Auxiliary light bulb socket
U5C528E0.book Page 30 Wednesday, July 10, 2013 9:43 AM