INSTRUMENT AND CONTROL FUNCTIONS
4-8
4
Self-
d
ia
g
nosis
d
evice
This model is equipped with a self-di-
agnosis device for various electrical
circuits.
If a problem is detected in any of those
circuits, the engine trouble warning
light will come on or flash, and the
odometer/tripmeter/clock display will
indicate an error code.
If the odometer/tripmeter/clock display
indicates any error codes, note the
code number, and then have a
Yamaha dealer check the vehicle.
The self-diagnosis device also detects
problems in the immobilizer system
circuits.
If a problem is detected in the immobi-
lizer system circuits, the immobilizer
system indicator light will flash, and the
display will indicate an error code.
TIP
If the display indicates error code 52,
this could be caused by transponder
interference. If this error code appears,
try the following.
1. Use the code re-registering key to
start the engine.
TIP
Make sure there are no other immobi-
lizer keys close to the main switch, and
do not keep more than one immobilizer
key on the same key ring! Immobilizer
system keys may cause signal interfer-
ence, which may prevent the engine
from starting.
2. If the engine starts, turn it off and
try starting the engine with the
standard keys.
3. If one or both of the standard keys
do not start the engine, take the
vehicle, the code re-registering
key and both standard keys to a
Yamaha dealer and have the stan-
dard keys re-registered.
NOTICE
ECA11591
If the
d
isplay in
d
icates an error
co
d
e, the vehicle shoul
d
b
e checke
d
as soon as possi
b
le in or
d
er to avoi
d
en
g
ine
d
ama
g
e.
Bri
g
htness control mo
d
e
The brightness can be adjusted for the
following:
1. Engine trouble warning light “
”
2. Error code display
3. Immobilizer system indicator light
1
2
3
1. Multi-function meter unit panel
2. LCD
3. Speedometer needle
4. Tachometer needle
5. Fuel gauge needle
U5C528E0.book Page 8 Wednesday, July 10, 2013 9:43 AM
