Perio
d
ic maintenance an
d
a
d
justment
7-33
7
EAU24135
Replacin
g
the tail/
b
rake li
g
ht
b
ul
b
1. Remove the tail/brake light lens by
removing the screws.
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
NOTICE:
Do not over-
ti
g
hten the screws, otherwise
the lens may
b
reak.
[ECA10682]
EAU42463
Replacin
g
a front turn si
g
nal
li
g
ht
b
ul
b
1. Remove the front turn signal light
outer lens by removing the
screws.
2. Remove the inner lens by pulling it
out.
3. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Place the inner lens in the original
position, and then install the outer
lens by installing the screws.
NOTICE:
Do not overti
g
hten the
screws, otherwise the lens may
b
reak.
[ECA10682]
1. Screw
1. Screw
1. Inner lens
UBH910E0.book Page 33 Wednesday, June 17, 2015 9:58 AM
Downloaded from
ManualsNet.com