Yamaha STAGEPAS 400BT, Owner'S Manual

Page: 11 / 32

English
Quick Start Guide
STAGEPAS 600BT/STAGEPAS 400BT Owner’s Manual
11
Quick Start Guide
Connectin g the speakers and the mixer
1.
Slide the mixer’s lock in the direction of the arrow (shown below), and then
remove it from the speaker.
2.
Open the cover panel attached to the other speaker, and then remove the box
from inside the accessory compartment.
Two speaker cables and one power cord are included in the box.
NOTE
After the box is removed, loose items, such as the included power cord, speaker cables, and
an optional microphone can be conveniently stored in the accessory compartment.
3.
Connect the speakers and the mixer.
Connect the mixer’s SPEAKERS jacks (red) to the speakers’ input jacks (red) using
the included speaker cables. As shown in the illustration below, be sure to insert
the speaker cables all the way inside until secure.
Notice
Use only the included speaker cables. Use of other cables may result in heat generation, or
short circuiting.
Accessory
compartment
Cover panel
Input jack
SPEAKERS jack