What to do if the sound bar and subwoofer are not paired
automatically
Normally, the sound bar and subwoofer are paired automatically, but if they are not properly paired due to a
temporary communications failure, pair them manually.
NOTE
Pairing is the process of having the sound bar and subwoofer recognize one another as devices to connect to.
1
Turn off the sound bar.
2
Press and hold SUBWOOFER (-) on the remote control for at least five seconds.
The sound bar is turned on, and the OPTICAL indicator on the sound bar flashes.
Flashes
3
Within 30 seconds, press and hold PAIRING on the rear of the subwoofer for at least
five seconds.
When the sound bar and subwoofer have been paired successfully, the
*
indicator glows.
If the
*
indicator on the subwoofer does not glow after following the procedure above, do the following and
then perform pairing manually again.
(
Move the subwoofer and/or the sound bar so that they are closer to each other.
75
TROUBLESHOOTING > Other frequent actions
Summary of Contents for SR-B40A
Page 1: ...Sound Bar User Guide EN ...
