SEQTRAK User Guide
98
17.6.2 DELAY
NO. NAME
TYPE
PARAMETER 1 PARAMETER 2 PARAMETER 3
1 TEMPO DELAY 4TH
TEMPO DELAY -
STEREO
DELAY TIME
FEEDBACK LEVEL
FEEDBACK -
HIGH DAMP
2 PING PONG DELAY 4TH
TEMPO CROSS -
DELAY
DELAY TIME L>R &
DELAY TIME R>L
FEEDBACK -
HIGH DAMP
3 TEMPO DELAY 8TH DOT
TEMPO DELAY -
STEREO
DELAY TIME
FEEDBACK -
HIGH DAMP
4 TEMPO DELAY 8TH
TEMPO DELAY -
STEREO
DELAY TIME
FEEDBACK -
HIGH DAMP
5 PING PONG DELAY 8TH
TEMPO CROSS -
DELAY
DELAY TIME L>R &
DELAY TIME R>L
FEEDBACK -
HIGH DAMP
6 TEMPO DELAY 16TH
TEMPO DELAY -
STEREO
DELAY TIME
FEEDBACK -
HIGH DAMP
7
ANALOG DELAY -
MODERN
ANALOG DELAY--
MODERN
DELAY TIME
DELAY INPUT -
LEVEL
8 ANALOG DELAY RETRO
ANALOG DELAY -
RETRO
DELAY TIME
DELAY INPUT –
LEVEL
17.7 Description of Sound Parameters
Parameter
Description
SOUND SELECT
Selects the type of sound.
PITCH
Sets pitches by half-step intervals.
PAN
Adjusts the left/right stereo image.
VOLUME
Adjusts the volume.
AEG ATTACK
Sets the time from when a keyboard key is played until the volume
reaches the level set by the attack level.
AEG DECAY/RELEASE
DECAY: Sets the time from when the volume set at the attack level is
reached until the volume set at the decay level is reached.
RELEASE: Sets the time from when the keyboard key is released
until the note fades out.
LP-HP FILTER CUTOFF
Sets the cutoff frequencies for the low-pass and high-pass filters.
LP-HP FILTER RESONANCE
Applies resonance to the low-pass and high-pass filters.
REVERB SEND
Sets the amount of signal sent to the reverb effect (send level).
The larger the value, the deeper the reverb.
DELAY SEND
Sets the amount of signal sent to the delay effect (send level).
The larger the value, the stronger the delay.
EQ HIGH GAIN
Sets the amount of gain for increasing or decreasing the high
frequency range with the EQ.
EQ LOW GAIN
Sets the amount of gain for increasing or decreasing the low
frequency range with the EQ.
MONO/POLY/CHORD
Selects the voicing method.
MONO: single tone, POLY: multiple tones, CHORD: chords