SEQTRAK User Guide
64
10.1.3 Master effects
Master effects are applied to the overall sound at the final stage of audio output. They are
connected in the order shown below.
The HIGH PASS and REPEATER effects are primarily for use in performance. When adjusting
parameters, the effect turns off when you remove your finger from the slider.
1.
MASTER
When the [MASTER/SINGLE] switch is set to MASTER, you can use the [FX] knob to
change the type and the touch sliders to adjust the parameters.
2.
HIGH PASS
Use the [HIGH PASS] touch slider to adjust the parameters. The default setting is a high-
pass filter. You can use the SEQTRAK app to change the effect type.
3.
REPEATER
Use the [REPEATER] touch slider to adjust the parameters. The default setting is BEAT
REPEAT, which repeats the input sound. You can use the SEQTRAK app to change the
effect type.
4.
COMPRESSOR
This effect compresses loud voices and lifts quiet voices to create a more dynamically
consistent and powerful sound. You can use the SEQTRAK app to change the effect type
and adjust the parameters.
5.
5 BAND EQ
This equalizer is used to correct the sound in five frequency ranges, from low to high. You
can use the SEQTRAK app to adjust the parameters.