27
Basics Section
Quick Guide
Refer
ence
Appendix
Basic Operations
[EXIT] button
Press the [EXIT] button to move up (exit) in the
hierarchical structure and return to the previous
screen.
n
Depending on the particular operation, the [EXIT]
button performs other functions as well. These
alternates functions are indicated in the appropriate
sections of the manual.
Entering Data
Use the [INC/YES] and [DEC/NO] buttons to increment
through the values, or input the value directly by using
the numeric keypad and the [ENTER] button.
Moving the Cursor Position
For certain parameters, such as Voice Name and
others, the [
]/[
] buttons are used to move the
cursor position in the display. (The selected
character flashes.) Move the cursor to the desired
position, then set the value.
[INC/YES] and [DEC/NO]
buttons
These are used to change the value of the currently
selected parameter. You can use the [INC/YES] button
to increment a parameter setting by one step, or the
[DEC/NO] button to decrement it. If you hold down
either button, the value is continuously changed. You
can also use these buttons to answer “YES” or “NO”
when a confirmation message is displayed.
n
To decrease the value by 10, simultaneously hold down
the [DEC/NO] button and press the [INC/YES] button.
To increase the value by 10, simultaneously hold down
the [INC/YES] button and press the[DEC/NO] button.
Data Dial
Rotating the data dial to the right (clockwise) increases
the value, while rotating it to the left counter-
clockwise) decreases it.
EXIT
ENTER
KEYBOARD
–
0
1
2
3
4
5
6
7
8
9
GUITAR
ORGAN
PIANO
BASS
STRINGS
BRASS
REED/PIPE
SYN LEAD
SYN COMP
CHROMATIC
PERCUSSION
SYN PAD
INC/YES
DEC/NO
DATA
INC/YES
DEC/NO
DATA
