Yamaha S03 voice editor, Owner'S Manual

Page: 60 / 112

60
Multi Mode
●
USER
❏
Settings : US001~US128, USDR01~USDR02
●
GM/XG
Use the [
E
] and [
F
] buttons to switch among the
different banks for selecting program numbers.
❏
Settings :
Bank Select: BK*** (Refer to the XG Voice List and
XG Drum List in the separate Data List.
Program Number: XG001~XG128 (The actual number of
available programs differs depedning on
the selected bank. For details, refer to
the XG Voice List and XG Drum List in
the separate Data List.)
2. Volume
Set the output level of the Part.
❏
Settings : 0~127
3. Pan
Set the stereo pan position of the Part.
❏
Settings : Rnd (random; the pan position moves randomly
each time a key is played), L63 (Left) ~ C (Center)
~ R63 (Right)
n
You can also enter the settings below using the numeric
keypad.
0: Rnd
1~63: L63~L01
64: C (Center)
65~127: R01~R63
4-1. NtLmt-L (Note Limit Low)
4-2. NtLmt-H (Note Limit High)
Set the lowest and highest notes of the keyboard range
for each Part. Each Part will only sound for notes
played within its specified range.
❏
Settings : C-2 ~ G8
n
You can set the lowest and highest notes in the range by
pressing notes on the keyboard while holding down the
[ENTER] button.
n
For more information and some example settings, see
page 41.
5-1. VelLmt-L (Velocity Limit Low)
5-2. VelLmt-H (Velocity Limit High)
Set the minimum and maximum values of the velocity
range within which each Part will respond. Each Part
will only sound for notes played within its specified
velocity range.
❏
Settings : 1~127
Synth St
US001
KEY ELEM PART
OCTAVE
PAGE
1
GrandPno
XG001
KEY ELEM PART
OCTAVE
PAGE
1
Volume
100
KEY ELEM PART
OCTAVE
PAGE
2 1
Pan
C
KEY ELEM PART
OCTAVE
PAGE
3 1
NtLmt-L
C-2
KEY ELEM PART
OCTAVE
PAGE
4 1
NtLmt-H
G8
KEY ELEM PART
OCTAVE
PAGE
4 1
VelLmt-L
KEY ELEM PART
OCTAVE
PAGE
5
VelLmt-H
127 001
KEY ELEM PART
OCTAVE
PAGE
5
1
1
Voice Selection/Part Mix