Yamaha S-03SL, Owner'S Manual

Page: 94 / 112

94
MIDI Mode
3. Rcv Ch
(Voice Mode MIDI Receive Channel)
Set the MIDI Receive channel for using the S03 (in the
Voice mode) with an external sequencer, computer and
so on, and for using it as a MIDI tone generator.
❏
Settings: 1 ~ 16, omni (all channels)
n
For information on setting the MIDI Receive channel for
each Part in the Multi mode, see page 61.
4. Trans Ch (MIDI Transmit Channel)
Set the MIDI Transmit channel for transmitting MIDI
from the keyboard, controllers and so on.
❏
Settings: 1 ~ 16
5-1. RxPgmChng
(Receive Program Change On/Off)
5-2. RxBankSel
(Receive Bank Select On/Off)
Set to enable or disable reception of Program Change/
Bank Select messages between the S03 and an external
MIDI device.
❏
Settings: off (disable), on (enable)
6-1. TxPgmChng
(Transmit Program Change On/Off)
6-2. TxBankSel
(Transmit Bank Select On/Off)
Determines whether Program Change/Bank Select
messages executed from the S03’s panel are
transmitted via MIDI or not. Set this to “on” when
you want to change programs on a connected MIDI
device.
❏
Settings: off (disable), on (enable)
7. Thru Port
You can connect the S03 to a computer via a dedicated
serial cable on the TO HOST connector. In this
situation, MIDI messages received via the TO HOST
connector can be passed through the MIDI OUT
connector of the S03 to other connected devices. Set
the port number here.
❏
Settings: 1 ~ 8
Rcv Ch
omni
KEY ELEM PART
OCTAVE
PAGE
3
Trans Ch
01
KEY ELEM PART
OCTAVE
PAGE
4
RxPgmChng
off
KEY ELEM PART
OCTAVE
PAGE
5
RxBankSel
on
KEY ELEM PART
OCTAVE
PAGE
5
TxPgmChng
on
KEY ELEM PART
OCTAVE
PAGE
6
TxBankSel
on
KEY ELEM PART
OCTAVE
PAGE
6
Thru Port
1
KEY ELEM PART
OCTAVE
PAGE
7
MIDI Channel/MIDI Filter