Yamaha S-03SL, Owner'S Manual

Page: 70 / 112

70
V
oice Mode
Voice Mode
Voice Edit
There are two types of Voices: Normal Voices and
Drum Voices. The following is an explanation of the
parameters used to edit each Voice.
n
Details about the Voice types and the Voice Memories are
given on Page 25.
n
For more information on playing Voices, see page 33.
n
You need to select the Voice before entering Voice Edit
mode (Page 33). All parameters can be set and stored per
Voice.
n
See page 28 on how to enter Voice Edit mode.
The E Indicator
If you alter any parameters in Voice Edit mode, the E
(Edit) indicator will be displayed in the PAGE
column of the screen after exiting from the Voice
Edit mode. This gives a quick indication that the
current Voice has been modified but not yet stored.
The Compare Function
Use this to listen to the difference between the Voice
with your edited settings and the same Voice prior to
editing.
1
Press the [COMPARE (EDIT)] button while in
Voice Edit mode. The EDIT LED will flash and
the Voice settings prior to editing will temporarily
be reinstated for comparison purposes.
n
While the Compare function is enabled, the DEC/
NO and INC/YES buttons cannot be used for
editing.
2
Press the [EDIT] button again to disable the
Compare function and restore your recently
edited settings.
Switching Elements On/Off
In Voice Edit Mode, an Element can be switched on/
off when you press the [MUTE] button. This lets
you mute other Elements in the Voice so that you
can listen to the changes to the Element that you are
editing.
Voice Store
The edited settings for the current Voice will be lost
if you select another Voice or mode. To avoid losing
important data, you should always use Voice Store to
store your edited Voice. For details about the Voice
Store procedure, see page 89.
n
When creating a new Voice from scratch, it can be
useful, prior to editing, to clear the settings for the
current Voice using the Initialize Voice function in
the Voice Job mode (pages 87 and 88).
Normal Voice
When editing Normal Voices, there are 52 PAGES
consisting of 17 Common Edit settings (common to all
four Elements) and 35 Element-specific settings.
n
For information on how to switch between the Common
Edit displays and the Element Edit displays, see page 48.
n
Many parameters are the same as those for the Multis.
For details about those parameters, see page 22.
n
Refer to the Function Tree chart (page 20) or the
Parameter Table (page 22).
GrandPno
KEY ELEM PART
OCTAVE
PAGE
XG001
E
KEY ELEM PART
OCTAVE
PAGE
E
Edit indicator
PART ELEMENT KEY
MUTE
COMMON