Yamaha RXV765 - RX AV Receiver, Owner'S Manual

Page: 50 / 324

46
En
You can change various settings of this unit using the SETUP menu. See “Basic operation of the SETUP menu” on the
next page, and other respective pages to change the settings.
■
List of SETUP menu items
Changing various settings of this unit (SETUP menu)
Menu/Submenu Function Page
Speaker Setup Sets items for speakers. 47
1 Auto Setup (YPAO) Automatically adjusts output characteristics of speakers. 47
2 Manual Setup Manually adjusts output characteristics of speakers. 47
A)Config Sets speaker configurations, such as connection status of speaker and a size of the
connected speaker (sound reproduction capacity), suitable for the listening
environment.
47
B)Level Separately adjusts volume of each speaker. 49
C)Distance Adjusts timing at which each speaker outputs sound based on distances between
speakers and the listening position.
49
D)Equalizer Selects an equalizer that adjusts speaker output characteristics. 49
E)Test Tone Generates test tones. 49
Sound Setup Sets various items for sound outputs. 49
1 Dynamic Range Adjusts dynamic ranges of speakers and headphones. 49
2 Lipsync Adjusts delay in output timing between video signals and audio signals. 50
HDMI Auto Sets on or off of automatic adjustments for delay between output timing between
video signals input from the HDMI jack and audio signals.
50
Auto Delay Fine adjusts a delay time of HDMI Auto. 50
Manual Delay Manually fine adjusts the delay of audio and video output. 50
Function Setup Sets various items for HDMI and display. 50
1 HDMI Sets various items for input sources. 50
Control Selects on or off of HDMI control functions. 50
Standby Through Selects on or off of output of HDMI signals input from the HDMI 1-4 jacks to the
HDMI OUT jack when this unit is on standby.
50
Audio Output Selects this unit or a component connected to this unit via the HDMI OUT jack of
this unit for reproducing sound signals input from the HDMI 1-4 jacks.
50
Resolution Sets resolution of the HDMI output that is converted from analogy video input
signals.
50
Aspect Sets an aspect ratio of images reproduced by HDMI signals converted from analog
video input signals.
51
2 Display Sets items for a monitor or the front panel display. 51
Dimmer Sets brightness of the front panel display. 51
FL Scroll Selects the way to display characters on the front panel display. 51
OSD Shift Adjusts top and bottom positions of the OSD (on-screen display) menus.
51
3 Volume Sets items for volumes.
51
Adaptive DRC Adjusts the dynamic range (difference between the maximum volume and the
minimum volume) in conjunction with the volume level.
51
Max Volume Sets the maximum volume level so that the volume will not be accidentally
increased.
51
Init. Volume Sets the volume at the time this unit is turned on. 51
4 Input Rename Changes input source names to be displayed on a video monitor or the front panel
display.
52
5 Zone2 Sets the maximum volume level and initial volume level of Zone2. 52
Max Volume Sets the maximum volume level so that the volume will not be accidentally
increased.
52
Init. Volume Sets the volume at the time this unit is turned on. 52
DSP Parameter Sets parameters for the sound field programs. 52
Memory Guard Protects some settings against accidental alteration. 52