14
En
Connections
■
6.1-channel speaker layout
See page 17 for connection information.
y
We recommend that you also add the presence speakers for the
effect sounds of the CINEMA DSP sound field program. See
page 15 for details.
Front left and right speakers (FL and FR)
Center speaker (C)
Surround left and right speakers (SL and SR)
Subwoofer (SW)
The function and settings of each speaker are the same as
those for the 7.1-channel speaker layout (see page 13).
Surround back speaker (SB)
Connect a single surround speaker to the SURROUND
BACK (SINGLE) speaker terminals and place the single
surround back speaker behind the listening position. The
surround back left and right channel signals are mixed
down and output at the single surround back speaker when
you set “SUR.B L/R SP” to “SMLx1” or “LRGx1” (see
page 81).
■
5.1-channel speaker layout
See page 17 for connection information.
y
We recommend that you also add the presence speakers for the
effect sounds of the CINEMA DSP sound field program. See
page 15 for details.
Front left and right speakers (FL and FR)
Center speaker (C)
Subwoofer (SW)
The function and settings of each speaker are the same as
those for the 7.1-channel speaker layout (see page 13).
Surround left and right speakers (SL and SR)
Connect the surround speakers to the SURROUND
speaker terminals even if you place the surround speakers
behind the listening position.
For the smooth and unbroken sound field behind the
listening position, place the surround left and right
speakers farther back compared with the placement in the
7.1-channel speaker layout.
The surround back channel signals are directed to the
surround left and right speakers when “SUR.B L/R SP” is
set to “NONE” (see page 81).
SW
FR
FL
SB
SL
SR
C
60˚
30˚
SB
FL
FR
C
SL
SR
SR
80˚
SL
1.8 m (6 ft)
SW
FR
FL
SL
SR
C
60˚
30˚
FL
FR
C
SL
SR
SR
80˚
SL
1.8 m (6 ft)
For other speaker combinations
You can enjoy multi-channel sources with sound field programs by using a speaker combination other than the 7.1/
6.1/5.1-channel speaker combinations.
Use the automatic setup feature (see page 37) or set the “SPEAKER SET” parameters in “MANUAL SETUP” (see
page 80) to output the surround sounds at the connected speakers.
