Yamaha RXN600BL Owner'S Manual Download Page 95

Page: 95 / 132

ADVANCED SETUP

OPERA

ION

■

Speaker impedance

SP IMP.

Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices:

Ω

MIN

, 6

Ω

MIN

• Select “8

Ω

MIN” to set the speaker impedance to 8

Ω

• Select “6

Ω

MIN” to set the speaker impedance to 6

Ω

The Canada model cannot use two separate speaker systems
(A and B) simultaneously when “SP IMP.” is set to “8

Ω

MIN”.

■

Factory presets

PRESET

Use this feature to reset all the parameters of this unit to
the initial factory settings (see page 108).
Choices:

CANCEL

, RESET

• Select “CANCEL” not to reset any parameters of this

unit.

• Select “RESET” to reset the parameters of this unit.

• This setting completely resets all the parameters of this unit

including the “SET MENU” parameters. However, the
advanced setup menu parameters will not be initialized.

• The initial factory settings are activated next time you turn on

this unit.

■

Network reset

N-RESET

Use this feature to reset the network settings of this unit
(see page 84) to the initial factory settings.
Choices:

CANCEL

, RESET

• Select “CANCEL” not to reset any network settings of

this unit.

• Select “RESET” to reset the network settings of this

unit.

• The initial factory settings are activated next time you turn on

this unit.

• When the network settings are reset, “DHCP” in “NET/USB

MENU” is automatically set to “ON” (see page 84) and the
registered client ID of this unit on your YAMAHA MCX-2000
is cleared (see page 105).

■

Remote control AMP ID

REMOTE AMP

Use this feature to set the AMP ID of this unit for remote
control recognition (see page 96).
Choices:

ID1

, ID2

• Select “ID1” when the remote control AMP ID library

code is set to “00001”.

• Select “ID2” when the remote control AMP ID library

code is set to “00002”.

You need to set the corresponding remote control AMP library
code for the remote control (see page 96).

SP IMP.

Speaker

Impedance level

Ω

MIN

Front

If you use one set (A or B),
the impedance of each
speaker must be 8

Ω

higher.

If you use two sets (A and
B), the impedance of each
speaker must be 16

Ω

higher.

Center

The impedance of each
speaker must be 8

Ω

higher.

Surround

Surround back

Ω

MIN

Front

If you use one set (A or B),
the impedance of each
speaker must be 4

Ω

higher.

If you use two sets (A and
B), the impedance of each
speaker must be 8

Ω

higher.

Center

The impedance of each
speaker must be 6

Ω

higher.

Surround

Surround back

Notes

Note

Summary of Contents for RXN600BL





































































































































Search results

Summary of Contents for RXN600BL

Reviews:

Related manuals for RXN600BL

Brands by name

Popular brands

Yamaha RXN600BL, Owner'S Manual

Search results

Summary of Contents for RXN600BL

Reviews:

Related manuals for RXN600BL

Brands by name

Popular brands