Yamaha RX-V775, Owner'S Manual

Page: 33 / 139

PREPARATIONS
➤
Connecting to a network
En
33
Connect the unit to your router with a commercially-available STP network cable (CAT-5
or higher straight cable).
You can enjoy Internet radio or music files stored on media servers, such as PCs and
Network Attached Storage (NAS), on the unit.
• If you are using a router that supports DHCP, you do not need to configure any network settings for the unit,
as the network parameters (such as the IP address) will be assigned automatically to it. You only need to
configure the network settings if your router does not support DHCP or if you want to configure the network
parameters manually (p.98).
• You can check whether the network parameters (such as IP address) are properly assigned to the unit in
“Network” (p.104) in the “Information” menu.
• Some security software installed on your PC or the firewall settings of network devices (such as a router)
may block the access of the unit to the network devices or the Internet. In these cases, configure the
security software or firewall settings appropriately.
• Each server must be connected to the same subnet as the unit.
• To use the service via the Internet, broadband connection is strongly recommended.
6 Connecting to a network
AUDIO 1 AUDIO 2
OPTICAL
OPTICAL
COAXIAL
VIDEO
AV4
AV 3
AV2
AV 1
(TV)
P B Y
P
R
COMPONENT
VIDEO
VIDEO
MONITOR OUT
P
B
Y
P
R
HDMI 1 HDMI 2
(BD/DVD)
1 2
ARC
ANTENNA
FM AM
AV 5
VIDEO
AV 6
AV OUT ZONE OUT
S UR. BAC S URROUND FRONT
PRE OUT
S INGL
ZONE 2
NETWORK DC OUT
TRIGGER OUT
REMOTE
5V 0.5A (NET)
12V
IN
OUT
0.1A
COMPONENT VIDEO
HDMI OUT
(RADIO)
LAN
WAN
Network Attached Storage
(NAS)
Internet
Modem
Router
Network cable
PC
The unit (rear)
Mobile device
(such as iPod touch
and iPhone)
1 2 3 4 5 6
Network connections
7 8 9 10