background image

Check that the following accessories are supplied with the product.

The following cables (not supplied) are required to build the system described in this 
document.

• Speaker cables (depending on the number of speakers)

• HDMI cable (x2)

• Audio pin cable (x1)

• Digital optical cable (x1) 

(not required if your TV supports ARC [Audio Return Channel])

1

Preparation

Accessories

Remote control

Batteries 

(AAA, R03, UM-4) (x2)

Insert the batteries the right way round.

AM antenna

FM antenna

YPAO microphone

CD-ROM 

(Owner’s Manual)

Safety Brochure

Easy Setup Guide

• The illustrations of the main unit and remote control used in this guide are of the RX-V775 (U.S.A. 

model), unless otherwise specified.

*The supplied FM antenna 

varies depending on the 
region of purchase.

Cables required for connections

Easy Setup Guide

English

AV Receiver

UAB

This document explains how to set up a 5.1- or 7.1-channel system and 
play back surround sound from a BD/DVD on the unit.

To reduce the impact on natural resources, the Owner’s Manual for this product is 

supplied on CD-ROM. For more information about this product, refer to the 

Owner’s Manual on the supplied CD-ROM.

PDF versions of this guide and “Owner’s Manual” can be downloaded from the 
following website.
http://download.yamaha.com/

[For U.S. customers only]
Visit the following website for additional information, FAQ’s, downloads such as 
“Owner’s Manual” and product updates.
http://usa.yamaha.com/support/

Summary of Contents for RX-V775









Reviews: