Yamaha RX-V685 Owner'S Manual Download

Page: 89 / 186

Checking the current status information

Displays the current status information as follows.

Option menu

“On-screen Information”

Press OPTION.

Use the cursor keys to select “On-screen Information” and press

ENTER.

The following information is displayed on the TV.

Input source/Party

mode status

CINEMA DSP status

Volume/YPAO
Volume status

Audio format

Decoder

Sound mode

To close the information display, press RETURN.

NOTE

▪ You can use the PROGRAM key on the remote control for displaying the status information on the TV. For

details, see the following:

– “Setting the function for the PROGRAM key on the remote control” (p.131)

▪ Use the left/right cursor keys to display other informations in the “Setup” menu on the TV.

Summary of Contents for RX-V685



























































































































































































Search results

Summary of Contents for RX-V685

Reviews:

Related manuals for RX-V685

Brands by name

Popular brands

Yamaha RX-V685, Owner'S Manual

Search results

Summary of Contents for RX-V685

Reviews:

Related manuals for RX-V685

Brands by name

Popular brands