Adjusting the delay of the Lipsync function
Adjusts the delay between video and audio output manually when “Delay Enable” in
the “Setup” menu is set to “Enable”.
Option menu
“Lipsync” > “Lipsync”
Setting range
0 ms to 500 ms (1 ms increments)
NOTE
For details on “Delay Enable” in the “Setup” menu, see the following:
▪ “Enabling Lipsync adjustment” (p.102)
Setting Compressed Music Enhancer
Enables/disables Compressed Music Enhancer.
Option menu
“Enhancer” > “Enhancer”
Settings
Off
Disables Compressed Music Enhancer.
On
Enables Compressed Music Enhancer.
NOTE
▪ This setting is applied separately to each input source.
▪ You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer.
▪ For details on Compressed Music Enhancer, see the following:
– “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.49)
Correcting volume differences during playback
n
Correcting volume differences between input sources
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Option menu
“Volume Trim” > “Input Trim”
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
NOTE
This setting is applied separately to each input source.
n
Adjusting the subwoofer volume
Fine-adjusts the subwoofer volume.
Option menu
“Volume Trim” > “Subwoofer Trim”
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
En
83
