Yamaha RX-V685 Owner'S Manual Download

Page: 18 / 186

Setting the speaker impedance

Under its default settings, the unit is configured for 8-ohm speakers. When connecting

6-ohm speakers, set the speaker impedance to “6

MIN”.

Before connecting speakers, connect the power cable to an AC

wall outlet.

While holding down STRAIGHT on the front panel, press MAIN
ZONE

(MAIN ZONE)

STRAIGHT

Check that “SP IMP.” is displayed on the front display.

ENHANCER

LINK

ECO

MASTER

OUT

-R

YPAO VOL. A - DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B

2 A

VOL.

FPR

SBL

SBR

FPL

MUTE VIRTUAL

SP IMP.••8¬MIN

Press STRAIGHT to select “6

MIN”.

Press MAIN ZONE

to set the unit to standby mode and remove

the power cable from the AC wall outlet.

You are now ready to connect the speakers.

Cable requirements

Use the following types of commercially-available cables to connect speakers to the
unit:

Speaker cables (the number of speakers

required)

Audio pin cable (for connecting a subwoofer)

–

How to connect speakers

Connecting the speaker

Connect a speaker cable between the negative (–) terminal of the unit and the
negative (–) terminal of the speaker, and between the positive (+) terminal of the unit
and the positive (+) unit of the speaker.

NOTICE

When connecting the speaker cables, take notice of the following:

▪ Prepare speaker cables in a place away from the unit, to avoid accidentally dropping wire strands into

the unit's interior which could result in a short circuit or malfunction of the unit.

▪ Improper connecting of the speaker cables may cause a short circuit and also damage the unit or the

speakers.

– Twist the bare wires of the speaker cables firmly together.

– Do not let the bare wires of the speaker cable touch one another.

– Do not let the bare wires of the speaker cable come into contact with the unit’s metal parts (rear panel

and screws).

Summary of Contents for RX-V685



























































































































































































Search results

Summary of Contents for RX-V685

Reviews:

Related manuals for RX-V685

Brands by name

Popular brands

Yamaha RX-V685, Owner'S Manual

Search results

Summary of Contents for RX-V685

Reviews:

Related manuals for RX-V685

Brands by name

Popular brands