Yamaha RX-V685 Owner'S Manual Download

Page: 111 / 186

Setting the initial volume for when the unit is turned

Sets the initial volume when the unit is turned on.

Setup menu

“Sound” > “Volume” > “Initial Volume”

Settings

Off

Sets the level to the volume level of the unit when it last
entered standby mode.

Mute

Sets the unit to mute the audio output.

-80.0 dB to +16.5 dB

(0.5 dB increments)
[0.5 to 97.0 (0.5
increments)]

Sets the level to the specified volume level.

NOTE

▪ This setting works only when the volume level is set lower than “Max Volume”. For details on “Max

Volume” in the “Setup” menu, see the following:

– “Setting the limit value of the volume” (p.110)

▪ For details on the scale of the volume display (dB unit or numeric value), see the following:

– “Setting the scale of the volume display” (p.132)

Adjusting the CINEMA DSP 3D effect level

automatically

Selects whether to automatically adjust the CINEMA DSP 3D effect level when the
volume is adjusted.

Setup menu

“Sound” > “Adaptive DSP Level”

Settings

Off

Does not adjust the effect level automatically.

Adjusts the effect level automatically.

Setting Virtual Surround Back Speaker (VSBS)

Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround

speakers.
When VSBS is enabled, the unit creates VSBS when no surround back speakers are
connected.

Setup menu

“Sound” > “Virtual Speaker” > “VSBS”

Settings

Off

Disables Virtual Surround Back Speaker (VSBS).

Enables Virtual Surround Back Speaker (VSBS).

NOTE

▪ VSBS is effective only when 6.1/7.1-channel content is played back.
▪ VSBS, that is working with CINEMA DSP 3D, is not available when the straight decode mode or the direct

playback mode is enabled.

111

Summary of Contents for RX-V685



























































































































































































Search results

Summary of Contents for RX-V685

Reviews:

Related manuals for RX-V685

Brands by name

Popular brands

Yamaha RX-V685, Owner'S Manual

Search results

Summary of Contents for RX-V685

Reviews:

Related manuals for RX-V685

Brands by name

Popular brands