Yamaha RX-V665BL, Owner'S Manual

Page: 28 / 94

24
En
Playback
When HDMI1-4 or AV1-4 is selected as the input source,
you can display audio/video signal information.
y
• Input signal information is displayed on both a video monitor and the
front panel display.
• Information on the input signal is also displayed on the front panel
display. You can select the desired item using
o
Cursor
k
/
n
.
1
Select the desired input source, and press
n
OPTION .
The option menu for the selected input source is
displayed (see page 43).
2
Press
o
Cursor
k
/
n
to select “Signal Info,”
and press
o
ENTER .
Information on input signals is displayed. See
page 44 on messages displayed on the screen.
Note
• If an HDMI related error occurs, error information is displayed at
the bottom of the screen.
• Information on the input signal is also displayed on the front panel
display. You can select the desired item using
o
Cursor
k
/
n
.
3
To end the information display, press
n
OPTION .
Information displayed on the front panel display can be
changed by pressing
E
INFO
(or
j
INFO
).
The following information can be displayed according to
the input source.
For example, if you select HDMI1 input and display “DSP
Program,” the following screen appears on the front panel
display.
The sleep timer is useful if you want to go to sleep while
this unit is playing or recording a source.
Press
f
SLEEP repeatedly to set the amount of
time.
Each time you press
f
SLEEP
, the front panel display
changes as shown below.
When the sleep timer is set, the SLEEP indicator on the
front panel display lights up.
Press
f
SLEEP
on the remote control repeatedly until
“Sleep Off” appears on the front panel display.
Displaying input signal information Changing information on the front
panel display
HDMI1-4: Input, DSP Program, Audio Decoder
AV1-6: Input, DSP Program, Audio Decoder
AUDIO1-2: Input, DSP Program, Audio Decoder
MULTI CH: Input
V-AUX: Input, DSP Program, Audio Decoder
FM/AM: Frequency, DSP Program, Audio
Decoder
XM: Channel, Category, Song, Antenna,
DSP Program, Audio Decoder
SIRIUS: Channel, Category, Artist / Song,
Composer, Antenna, DSP Program,
Audio Decoder
iPod (Simple remote mode): Input, DSP Program, Audio Decoder
iPod (Menu browse mode):
(in PlayInfo displayed) Artist, Album,
Song, DSP Program, Audio Decoder
(in Play menu displayed) List
Bluetooth: Input, DSP Program, Audio Decoder
Using the sleep timer
Straight
Input source
Sound field program (DSP program)
Sleep 120min. Sleep 90min.
Sleep 60min. Sleep 30min. Sleep Off