RESETTING THE SYSTEM
105
En
ADDITIONAL
INF
O
RMA
T
IO
N
English
Use this feature to reset all the parameters of this unit to the initial factory settings.
• This procedure completely resets all the parameters of this unit including the “SET MENU” parameters.
• The initial factory settings are activated next time you turn on this unit.
y
To cancel the initialization procedure at any time without making any changes, press
L
SYSTEM OFF
on the front panel.
1
Press
L
SYSTEM OFF
on the front panel to
set this unit to the standby mode.
2
Press and hold
M
TONE CONTROL
and
then press
K
MAIN ZONE ON/OFF
to turn
on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3
Rotate the
N
PROGRAM
selector to select
“INIT”.
4
Press
M
TONE CONTROL
repeatedly to
select “ALL”.
y
Select “CANCEL” to cancel the initialization procedure
without making any changes.
5
Press
L
SYSTEM OFF
to confirm your
selection and set this unit to the standby
mode.
Resetting the system
Notes
TONE CONTROL
ON/OFF
MAIN ZONE
While holding
down
