20
En
Optimizing the speaker setting for your listening room (YPAO)
Press
n
Cursor
n
once, and select “Retry” or
“Exit” using
n
Cursor
l
/
h
and then press
n
ENTER
.
Retry
Performs “Auto Setup” again.
Exit
Terminates the measurement and “Auto Setup.”
y
•
See page 53 for details on error messages.
•
When “E-5:NOISY” appears, you can continue measurement. To
continue measurement, select “Proceed.” However, we recommend that
you solve the problem first and then perform measurement again.
If a problem occurs during measurement, “WARNING” is
displayed on the result display screen. Check the error and
solve the problems.
y
•
See page 54 for details on warning messages.
•
Optimization will not be performed while a warning message is
displayed. We recommend that you solve the problem and perform “Auto
Setup” again.
1
Check if “
→
” is displayed on the left of
“WARNING” and press
n
ENTER
.
Details of the warning message are displayed. If there
are multiple warning messages, you can display the
next message using
n
Cursor
h
.
2
To return to the top result display, press
n
ENTER
again.
When an error message is displayed
during measurement
ERROR
Don'toperate
.
E-9:USER CANCEL
[ENTER]:Return
any function
>RetryExit
[]/[]:Select
p
[
When a warning message is displayed
after measurement
WARNING
Reversechannel
W-1:OUTOFPHASE
[ENTER]:Return
FL---
CENTER
SL---
SBL---
