Yamaha RX-V483 Owner'S Manual Download

Page: 77 / 157

Audio In (Audio In)

Combines the video jack of the selected input source with an audio jack of others. For
example, use this function in the following cases.

• Connecting a playback device that supports HDMI video output, but not HDMI

audio output

Input sources

HDMI 1-4, AV 1-3

Settigns

AV 1-3, AUDIO 1-3

Setup procedure

See “Changing the combination of video/audio input jacks” (p.24).

Video Out (Video Out)

Selects a video to be output with the selected audio source. For example, you can
watch the video while listening to the radio.

Input sources

AUX, AUDIO 1-3, TUNER, (network sources), AirPlay, MusicCast Link, SERVER, NET
RADIO, Bluetooth, USB

Settings

Off(Off)

Does not output video.

HDMI 1-4, AV 1-3

Outputs video input through the corresponding video input jacks.

Volume Interlock (Vol.Interlock)

Enables/disables volume controls from iTunes/iPhone via AirPlay.

Settings

Off (Off)

Disables volume controls from iTunes/iPhone.

Limited(Ltd)

Enables volume controls from iTunes/iPhone within the limited range
(-80 dB to -20 dB and mute).

Full (Full)

Enables volume controls from iTunes/iPhone in the full range
(-80 dB to +16.5 dB and mute).

Summary of Contents for RX-V483






























































































































































Search results

Summary of Contents for RX-V483

Reviews:

Related manuals for RX-V483

Brands by name

Popular brands

Yamaha RX-V483, Owner'S Manual

Search results

Summary of Contents for RX-V483

Reviews:

Related manuals for RX-V483

Brands by name

Popular brands