Yamaha RX-V467BL Quick Reference Manual Download Page 1

PUSH

Ex.

Ex.

- 1 -

English

Quick Reference Guide

Preparing the remote control

Accessories

 ■

Items necessary for connection 

 ■

The following accessories are supplied with this product. 

Speakers

External components

Remote control

Front speaker

Ex.

Ex.

Batteries (2) (AAA, R03, UM-4)

Center speaker

AM loop antenna

Surround speaker

Indoor FM antenna

VIDEO AUX input cover

Active subwoofer

1

2

2

3

3

YPAO microphone

within 6 m

 (20 ft)

1

   Take off the battery compartment cover.

2

   Insert the two supplied AAA batteries 

into the battery case, following the 
polarity markings.

3

   Snap the battery compartment cover 

back into place.

Be sure to aim the remote control directly at the 
remote control sensor on this unit during operation.

TV

Cable

Cables for connecting external components

• 

(may differ depending on the components you are connecting)

Speaker cables

• 

(a quantity to match the number of speakers you are connecting)

Audio pin cable

• 

(for subwoofer)

Playback device such as BD 

(Blu-ray Disc)/DVD players

Use speakers with an impedance of at least 6 Ω. 

• 

If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.

• 

Prepare at least two speakers (for front). The priority of the other speakers is as follows:

• 

1  Two surround speakers
2  One center speaker

Some features are not available in certain regions.

Summary of Contents for RX-V467BL









Reviews: